一、設備前應首要查看打茬機各部位，零件是否有松動現象，多功能涼茬機，如發現，需批改后方可設備。
1、 Before the equipment, check all parts of the stubble beater, whether the parts are loose or not, and multi-functional stubble cooler. If found, the equipment can only be approved.
二、設備時，打茬機跑車輪與道軌空地以打茬機與軌跡來回跑動時應為規范。
2、 When the equipment is used, it shall be standard when the stubble beater runs back and forth with the track between the sports wheel and the track.
三、涼茬機出產作業面為2.4*14m，每班次投料量為1500—2000公斤。
3、 The working surface of the stubble cooler is 2.4 * 14m, and the feeding amount of each shift is 1500-2000 kg.
四、打茬機設備完畢后，必須行試作業五分鐘左右，查看各部位是否有雜音現象呈現，如發現雜音應泊車檢修，待試作業正常后，方可投入正常出產運用。
4、 After the stubble machine equipment is completed, the trial operation must be carried out for about five minutes to check whether there is any noise in each part. If any noise is found, the machine shall be parked for maintenance. After the trial operation is normal, it can be put into normal production and operation.
五、運用過程中，應常常留意有無反常動態，顫抖是否加大，如發現雜音應及時泊車檢修。
5、 In the process of operation, it is necessary to pay attention to whether there is abnormal dynamic state and whether the shaking is increased. In case of noise, park the vehicle for maintenance in time.
六、涼茬機投入運用后，應定時查看螺栓有無松動，零部件有無損壞，如發現應根據具體情況檢修或替換零部件。
6、 After the stubble cooler is put into use, check whether the bolts are loose and whether the parts are damaged regularly. If found, repair or replace the parts according to the specific situation.
七、在運用過程中，注油部位應定時注油，一般每三個月注黃油一次，以保證打茬機各傳動不問光滑正常，減少磨損。
7、 In the process of application, the oiling part should be regularly oiled, generally once every three months, to ensure that the transmission of the stubble machine is smooth and normal, and reduce wear.
八、涼茬機若長時間停用從頭投入出產運用時，要從頭進行查看，并通過試車作業正常后再投入出產運用。
8、 If the stubble cooler is out of service for a long time and put into production from the beginning, it shall be checked from the beginning, and put into production and operation after normal trial operation.
With the summary of automatic stubble cooler, I hope it can help our customers. If you don't understand or ask for help, please click our website: http://m.justeve.cn or call us for consultation. We will try our best to solve it for you
自動售酒機 2024-07-25 
